Dell OptiPlex 7050 Tower - Controls and Lights Specifications; Environmental Specifications

17 SATA 3 connector 18 Speaker connector
19 ATX power connector 20 HDD and ODD power connector
21 SATA 2 connector 22 SATA 0 connector
23 CMOS_CLR/Password/Service_Mode Jumper
Controls and lights specications
Feature Specication
Power button light White light — Solid white light indicates power-on state; blinking white light indicates sleep state of the computer.
Hard Drive activity
light
White light — Blinking white light indicates that the computer is reading data from or writing data to the hard
drive.
Back panel:
Link integrity light on
integrated network
adapter :
Green — a good 10 Mbps or 100 Mbps connection exists between the network and the computer.
Orange — a good 1000 Mbps connection exists between the network and the computer.
O (no light) — the computer is not detecting a physical connection to the network.
Network activity
light on integrated
network adapter
Yellow light — A blinking yellow light indicates that network activity is present.
Power supply
diagnostic light
Green light — The power supply is turned on and is functional. The power cable must be connected to the power
connector (at the back of the computer) and the electrical outlet.
Environmental specications
Temperature
Specications
Operating 0°C to 35°C (32°F to 95°F)
Storage –40°C to 65°C (–40°F to 149°F)
Relative humidity
(maximum)
Specications
Operating 10 % to 90 % (non condensing)
Storage 5 % to 95 % (non condensing)
Maximum
vibration:
Specications
Operating 0.66 GRMS
Storage 1.30 GRMS
Maximum shock: Specications
Operating 110 G
Storage 160 G
Altitude
(maximum)
Specications
Operating –15.2 m to 3048 m (–50 to 10,000 ft)
80 Technical specications