System board
Removing the system board
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the side cover.
3. Remove the graphics card
4. Remove the solid-state drive.
5. Remove the WLAN card.
6. Remove the fan assembly.
7. Remove the memory module.
8. Remove the speaker.
9. Remove the processor.
About this task
The following images indicate the location of the system board and provide a visual representation of the removal procedure.
Discrete system board
1. M.2 WLAN connector
2. M.2 SSD PCIe connector
3. Coin-cell battery
4. M.2 SSD PCIe connector
5. Riser card connector
6. Processor socket
7. Memory slots
8. Intrusion switch
35 W system board
Removing and installing components
35
To Next Page
Loading...
