Dell OptiPlex 7090 Micro Form Factor - Page 49

Table 3. System setup options—System information menu (continued)
Overview
Slot 2 Displays the SATA hard drive information of the computer.
Slot 3 Displays the SATA hard drive information of the computer.
Slot 4 Displays the SATA hard drive information of the computer.
Table 4. System setup options—Boot Configuration menu
Boot Configuration
Boot Sequence
Boot Mode: UEFI only Displays the boot mode.
Boot Sequence Displays the boot sequence.
Secure Digital (SD) Card Boot Enable or disable the SD card read-only boot.
By default, the Secure Digital (SD) Card Boot option is not enabled.
Secure Boot
Enable Secure Boot Enable or disable the secure boot feature.
By default, the option is not enabled.
Secure Boot Mode Enable or disable to change the secure boot mode options.
By default, the Deployed Mode is enabled.
Expert Key Management
Enable Custom Mode Enable or disable custom mode.
By default, the custom mode option is not enabled.
Custom Mode Key Management Select the custom values for expert key management.
Table 5. System setup options—Integrated Devices menu
Integrated Devices
Date/Time Displays the current date in MM/DD/YYYY format and current time in
HH:MM:SS AM/PM format.
Audio
Enable Audio Enable or disable the integrated audio controller.
By default, all the options are enabled.
Serial Port
Serial Port Configuration Enable or disable the serial port address.
By default, the COM1: Port is configured at 3F8h with IRQ4 option is
enabled.
USB Configuration
● Enable or disable booting from USB mass storage devices through the boot
sequence or boot menu.
By default, all the options are enabled.
Front USB Configuration Enable or disable the individual front USB ports.
By default, all the options are enabled.
Rear USB Configuration Enable or disable the individual rear USB ports.
By default, all the options are enabled.
Dust Filter Maintenance Enable or disable the dust filter maintenance.
System setup 49