Table 35. System setup options—Display menu(continued)
Display
Hybrid Graphics/ Advanced Optimus Allows both the integrates and discrete graphics controllers to work together for
optimized capability and battery life.
By default, the Hybrid Graphics/ Advanced Optimus option is enabled.
Table 36. System setup options—Connection menu
Connection
Wireless Device Enable
WLAN Enables or disables the internal WLAN device.
By default, the WLAN option enabled.
Bluetooth Enables or disables the internal Bluetooth device.
By default, the Bluetooth option enabled.
Enable UEFI Network Stack Enables or disables the UEFI Network Stack and controls the onboard LAN
Controller.
By default, the Enable UEFI Network Stack option is enabled.
HTTP(s) Boot Feature
Table 37. System setup options—Power menu
Power
Battery Configuration Enables or disables the computer to run on battery during peak power usage hours.
Use the table Custom Charge Start and Custom Charge Stop, to prevent AC
power usage between certain times of each day.
By default, the Adaptive option is selected. Battery settings are adaptively
optimized based on your typical battery usage pattern.
Advanced Configuration
Enable Advanced Battery Charge
Configuration
Enables Advanced Battery Charge Configuration from the beginning of the day
to a specified work period. When enabled, Advanced Battery Charged maximizes
battery health while still supporting heavy use during the work day.
By default, the Enable Advanced Battery Charge Configuration option is disabled.
Peak Shift
Enable Peak Shift Enables the computer to run on battery during peak power usage hours.
By default, the Enable Peak Shift option is disabled.
Thermal Management Enables or disables cooling of fan and manages processor heat to adjust the
computer performance, noise, and temperature.
By default, the Optimized option is selected. Standard setting for balanced
performance, noise, and temperature.
USB PowerShare
Wake on Dell USB-C Dock When enabled, connecting a Dell USB-C Dock wakes the computer from Standby,
Hibernate, and Power Off.
By default, the Wake on Dell USB-C Dock option is enabled.
Block Sleep Enables or disables the computer from entering Sleep (S3) mode in the operating
system.
By default, the Block Sleep option is disabled.
114
To Next Page
Loading...
