Steps
Place the palm-rest and keyboard assembly on a flat and clean surface and perform the post-requisites to install the palm-rest
and keyboard assembly.
Next steps
1. Install the display assembly.
2. Install the touchpad.
3. Install the speakers.
4. Install the power-adapter port.
5. Install the power button with optional fingerprint reader.
6. Install the system board.
7. Install the I/O board.
8. Install the fan.
9. Install the coin-cell battery.
10. Install the wireless card.
11. Install the M.2 2230 solid-state drive or M.2 2280 solid-state drive.
12. Install the memory module.
13. Install the battery.
14. Install the base cover.
15. Follow the procedure in After working inside your computer.
Removing and installing components
59
To Next Page
Loading...
