Display panel
Removing the display panel for computers shipped with a plastic
chassis
CAUTION: The information in this removal section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover for computers shipped with a plastic chassis.
3. Remove the M.2 2230 solid-state drive for computers shipped with a plastic chassis.
4. Remove the wireless card for computers shipped with a plastic chassis.
5. Remove the display assembly for computers shipped with a plastic chassis.
6. Remove the display bezel for computers shipped with a plastic chassis.
About this task
NOTE: The display panel is assembled with the display brackets and display hinges as a single service part.
The following images indicate the location of the display panel and provide a visual representation of the removal procedure.
Figure 78. Removing the display panel screws
Removing and installing Field Replaceable Units (FRUs)
109
To Next Page
Loading...
