Table 34. System setup options—Display menu(continued)
Display
Brightness on AC power Enables to set the screen brightness when the computer is running on AC power.
By default, the screen brightness is set to 100 when the computer is running on
AC power.
Full Screen Logo Enables or disables the computer to display a full-screen logo, if the image
matches screen resolution.
By default, the Full Screen Logo option is disabled.
Table 35. System setup options—Connection menu
Connection
Network Controller Configuration
Integrated NIC Enables or disables the on-board LAN Controller.
By default, the Enabled with PXE option is selected.
Wireless Device Enable
WLAN Enables or disables the internal WLAN device.
By default, the WLAN option is enabled.
Bluetooth Enables or disables the internal Bluetooth device.
By default, the Bluetooth option is enabled.
Enable UEFI Network Stack Enables or disables the UEFI Network Stack and controls the onboard LAN
Controller.
By default, the Auto Enabled option is selected.
HTTP(s) Boot Feature
HTTP(s) Boot Displays if the computer has HTTP(s) Boot capabilities or not.
By default, the HTTP(s) Boot option is enabled.
HTTP(s) Boot Modes Allows you to set the HTTP(s) Boot Mode for the computer.
By default, the Auto Mode option is selected. HTTP(s) Boot automatically
extracts Boot URL from Dynamic Host Configuration Protocol (DHCP).
Table 36. System setup options—Power menu
Power
Battery Configuration Enables or disables the computer to run on battery during peak power usage
hours. Use the table Custom Charge Start and Custom Charge Stop, to
prevent AC power usage between certain times of each day.
By default, the Adaptive option is selected. Battery settings are adaptively
optimized based on your typical battery usage pattern.
Advanced Configuration
Enable Advanced Battery Charge
Configuration
Enables Advanced Battery Charge Configuration from the beginning of the day
to a specified work period. When enabled, Advanced Battery Charged maximizes
battery health while still supporting heavy use during the work day.
By default, the Enable Advanced Battery Charge Configuration option is
disabled.
Thermal Management Enables or disables cooling of fan and manages processor heat to adjust the
computer performance, noise, and temperature.
146 BIOS Setup
To Next Page
Loading...
