Dell P2423 - Page 46

46  │  Operating the monitor
Input Source Use Input Source to select between the different
video signals that may be connected to your monitor.
VGA Select VGA input when you are using the VGA
connector. Press the joystick to confirm the selection.
DVI-D Select DV
I-D input when you are using the DVI-D
connector. Press the joystick to confirm the selection.
HDMI Select HDM
I when you are using the HDMI
connector. Press the joystick to confirm the selection.
DP Select DP
when you are using the DisplayPort (DP)
connector. Press the joystick to confirm the selection.
Auto Select Automatically scans for available input
sources. The
default is On. Press the joystick to confirm the
selection.
Rename Inputs Allows you to specify a preset input name for the
se
lected input source. The preset options are PC,
PC 1, PC 2, La
ptop, Laptop 1, and Laptop 2. The
default setting is Off.
NOTE: Th
e input names shown in the warning
messages and Display Info will not be changed.
Reset Input
Sour
ce
Resets your monitor input settings to the factory
settings.