50 │ Operating the monitor
Sharpness This feature can make the image look sharper or
softer.
Move the joystick to adjust the sharpness level from
'0' to '100'.
Pixel Clock The Phase and Pixel Clock adjustments allow you to
adjust your monitor to your preference.
Move the joystick to adjust for best image quality.
NOTE: The feature is only available for VGA input.
Phase If satisfactory results are not obtained using the
Phase adjustment, use the Pixel Clock (coarse)
adjustment and then use Phase (fine) again.
NOTE: The feature is only available for VGA input.
Response Time Allows you to set the Response Time to Normal or
Fast.
Reset Display Resets all display settings to the factory preset values.
To Next Page
Loading...
