58 │ Operating the monitor
When the monitor goes into Standby mode, the following message appears:
Activate the computer and wake up the monitor to gain access to the OSD.
You will see the following message before the Lo
ck function is activated:
NOTE: The message may be slightly different according to the selected
settings.
The OSD functions only in the normal operation mode. If you press the joystick
during th
e Standby mode, the following message will appear depending on the
selected input:
Activate the computer and the monitor to gain access to the OSD.
NOTE: The message may be slightly different according to the
connected input signal.
To Next Page
Loading...
