Dell P3424WEB - Using DPBS Functionality

Setting up the monitor | 49
Using DPBS function
Waking on the USB-C cable
When you connect the USB-C cable, the Monitor/PC state is as follows:
New Power state of monitor (ON)*
Initial monitor power state (ON or Standby)
Initial monitor power state (ON or Standby)
New Power state of monitor (ON)
1 2
1 2
Initial system power state (OFF)
Initial system power state (ON)
New Power state of system (ON)*
New Power state of system (ON)
Connect USB-C
cable
Connect USB-C
cable
USB-C
USB-C
* Not all Dell PC systems support to
wake up the platform via the monitor.
USB-C
USB-C
USB-C
*Upon USB-C cable connection, mouse
movement or keyboard press might be
required to wake the system/monitor up
from sleep or hibernate.
USB-C
When you press the monitor power button or PC power button, the Monitor/PC state
is as follows:
New Power state of monitor (ON)
Initial monitor power state (OFF)
Initial monitor power state (ON)
1 2
1
2
Press PC/Monitor
power button
Press PC/Monitor
power button
Initial system power state (OFF)
Initial system power state (ON)
New Power state of system (ON)
New Power state of system (OFF)
USB-C
USB-C
USB-C
USB-C
USB-C USB-C
USB-C