Removing the display bezel
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working
inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Prerequisites
1. Remove the optical drive.
2. Remove the base cover.
3. Remove the wireless card.
4. Remove the display assembly.
Procedure
1. Using a plastic scribe, carefully pry up the display bezel from the top-left outer edge of the display back-cover and antenna
assembly.
2. Remove the display bezel off the display back-cover and antenna assembly.
46
Removing the display bezel 89
To Next Page
Loading...
