Dell P93G - Chapter 40: Removing the Display Panel; Prerequisites; Procedure

Removing the display panel
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Prerequisites
1. Remove the base cover.
2. Remove the battery.
3. Remove the wireless card.
4. Remove the display assembly.
5. Follow the procedure from step 1 to step 3 in "Removing the display back-cover and antenna assembly".
6. Remove the camera.
7. Remove the display cable.
Procedure
After performing the steps in prerequisites, we are left with the display panel.
40
68 Removing the display panel