Dell PowerConnect 2708 - Page 59

59
Use Saved IP — Uses the saved IP address for device configuration, when selected.
Use Current IP — Uses the current IP address for device configuration, when selected.
Default User — Uses the default user for device configuration, when selected.
Default Password — Uses the default password for device configuration, when selected.
Save User/Password — Saves the currently configured device user and password, when selected.
Reset to Default User/Password — Resets the device to the default user and password, when
selected.
Restore Configuration Factory Defaults — When selected, specifies that the factory configuration
default files should be reset. When unselected, maintains the current configuration settings.
Copying Files
1 Open the Copy Files page.
2 Define the Source and Destination fields.
3 Click Apply Changes .
4 The file is copied, and the device is updated.
Restoring Company Factory Default Settings
1 Open the Copy Files page.
2 Click Restore Company Factory Defaults
3 Click Apply Changes .
The company factory default settings are restored, and the device is updated.