58
Destination File Name (1-159 Characters) —
Indicates the Configuration file path to which the
file is uploaded.
NOTE: This list of user-defined configuration files only appears if the user created backup configuration
files. For example, if the user copied the running configuration file to a user-defined configuration file
called BACKUP-SITE-1, this list appears on the File Upload to Server page and the BACKUP-SITE-1
configuration file appears in the list.
Uploading Files
1
Open the
File Upload to Server
page.
2
Define the file type to upload.
3
Define the fields.
4
Click
Apply Changes
.
The software is uploaded to the device.
Copying Files
Files can be copied and deleted from the
Copy Files
page.
This applies to PowerConnect 2748
switch configuration only.
To open the
Copy Files
page, click
Copy Files
in the tree view.
Figure 6-11. Copy Files
Save Running Configuring to Backup
— When selected, saves the current device configuration to
the backup file.
Restoring Save Configuration
— Restores the previously saved device configuration. The possible
field values are:
To Next Page
Loading...
