57
Configuration Download
Server IP Address
(1-159 Characters)
— The Server IP Address from which the configuration files
are downloaded.
Source File Name
— Indicates the configuration files to be downloaded.
Downloading Files from Server
1
Open the
File Download
page.
2
Define the file type to download.
3
Define the fields on the page.
4
Click
Apply Changes
.
The software file is downloaded to the switch.
Uploading Files
The
File Upload to Server
page contains fields for uploading the software from the TFTP server to
the device. The image file can also be uploaded from the
File Upload to Server
page.
This applies
to the PowerConnect 2748 switch configuration only.
To open the
File Upload to Server
page,
click
File Upload
in the tree view.
Figure 6-10. File Upload to Server
Upload via TFTP
— Enables initiating an image upload via the TFTP server.
Upload via HTTP
— Enables initiating an image upload using the http protocol.
Configuration Upload
Server IP Address —
The Server IP Address to which the Configuration file is uploaded.
To Next Page
Loading...
