Dell PowerConnect 2808 - Aggregating Ports

Dell PowerConnect 28xx Systems User Guide 103
• LAG — Specifies if the port is part of a LAG.
Defining Port Parameters
1 Open the Port Configuration page.
2 Select a port in the Port Field.
3 Define the remaining fields.
4 Click Apply Changes .
The port parameters are saved to the device.
Modifying Port Parameters
1 Open the Port Configuration page.
2 Select a port in the Port Field.
3 Modify the remaining fields.
4 Click Apply Changes .
The port parameters are saved to the device.
Displaying the Port Configuration Table:
1 Open the Port Configuration page.
2 Click Show All.
The Ports Configuration Table opens:
Figure 7-8. Ports Configuration Table
Aggregating Ports
Load Balancing enables the even distribution of data and/or processing packets across available network
resources. For example, load balancing may distribute the incoming packets evenly to all servers, or
redirect the packets to the next available server. Load Balancing is configured on the "LAG
Configuration" on page 104 page.