Dell PowerConnect 2808 - Defining SNMP Notification Recipients

Dell PowerConnect 28xx Systems User Guide 77
3 Select a community from the Community Table.
4 Select the Remove check box.
5 Click Apply Changes .
The selected community entry is deleted, and the device is updated.
Defining SNMP Notification Recipients
The Notification Recipients page contains information for defining filters that determine whether traps
are sent to specific users, and the trap type sent. SNMP notification filters provide the following services:
• Identifying Management Trap Targets
•Trap Filtering
• Selecting Trap Generation Parameters
• Providing Access Control Checks
To open the Notification Recipients page, click System  SNMP  Notification Recipient in the
tree view.
Figure 6-19. Notification Recipients
• Recipient IP — Indicates the IP address to whom the traps are sent.
•
•
Notification Version — Determines the trap type. The possible field values are:
–
SNMPv1 — SNMP Version 1 traps are sent.
–
SNMPv2 — SNMP Version 2 traps are sent.
•
Remove Notification Recipient — When checked, removes selected notification recipients.