Dell PowerConnect 2808 - Command: Interface Port-Channel; Command: Interface Vlan

Dell PowerConnect 28xx Systems User Guide 161
Parameters range
• interface — Valid Ethernet port.
Command Modes
Global Configuration
Example
Console(config)# interface ethernet g1
Console(config-if)#
Command: interface port-channel
To configure a port-channel type and enter port-channel configuration mode, use the interface port-
channel
global configuration command.
interface port-channel
port-channel-number
Syntax Description
• port-channel-number — Port channel index.
Parameters range
• port-channel-number — Valid port channel
Command Modes
Global configuration
Usage Guidelines
Commands under the interface range context are executed independently on each interface in the range:
If the command returns an error on one of the interfaces, it will not stop the execution of the command
on other interfaces.
Example
Console (config)# interface port-channel 1
Console (config-if)#
Command: interface vlan
To configure a vlan type and enter interface configuration mode, use the interface vlan global
configuration command.
interface vlan
vlan-id