Dell PowerConnect 2808 - Address Binding

Dell PowerConnect 28xx Systems User Guide 91
Deleting Static Hosts
1 Open the Static Hosts page.
2 Click Show All .
The Static Hosts Table page opens.
3
Check the Remove checkbox next to a static host.
4 Click Apply Changes . The host is deleted, and the device is updated.
Address Binding
The Address Binding page displays a list of the DHCP server’s allocated IP addresses and each IP
address’s client identifier, lease expiration time, and allocation type. Open the Address Binding page,
click System
 DHCP Server  Address Binding in the tree view.
Figure 6-31. Address Binding
• IP Address — Displays the IP addresses of the clients whose bindings are displayed.
•
Client Identifier — A unique identification of the client specified in dotted hexadecimal notation,
e.g., 01b6.0819.6811.72.
•
Lease Expiration — Displays the lease expiration date and time of the host’s IP address.
•
Ty p e — Displays the manner in which the IP address was assigned to the host:
–
Static allocation — The network administrator maps the hardware address of a host to an IP
address on the DHCP server.
–
Permanent allocation — An IP address received through a standard request-reply mechanism is
owned by a client permanently
–
Dynamic allocation — A network device obtains a leased IP address for a specified period of time.
The IP address is revoked at the end of this period and the switch must request another IP address.