Dell PowerConnect 2808 - Command: Exit (EXEC); Command: Help; Command: Interface Ethernet

160 Dell PowerConnect 28xx Systems User Guide
Console#
Command: exit (EXEC)
To close an active terminal session by logging off the router, use the exit command in EXEC mode.
exit
Syntax Description
This command has no arguments or key words
Command Mode
EXEC
Default value
This command has no default setting.
Example
Console> exit
Command: help
To display a brief description of the help system, enter the help command.
help
Syntax Description
This command has no arguments or key words
Command Mode
All command modes.
Default value
This command has no default setting.
Command: interface ethernet
To configure an interface type and enter interface configuration mode, use the interface ethernet global
configuration command.
interface ethernet
interface
Syntax Description
• interface — The full syntax is: port .