Dell PowerConnect 2808 - Command: End; Command: Exit (Configuration)

Dell PowerConnect 28xx Systems User Guide 159
Command modes
All configuration modes
Command: end
To end the current configuration session and return to privileged EXEC mode, use the end global
configuration command.
end
Syntax Description
This command has no arguments or key words
Command Mode
All configuration modes
Default value
This command has no default setting.
Example
Console(config-if)# end
Console#
Command: exit (configuration)
To exit any configuration mode to the next highest mode in the CLI mode hierarchy, use the exit
command in any configuration mode.
exit
Syntax Description
This command has no arguments or key words
Command Mode
All configuration modes
Default value
This command has no default setting.
Examples
Console(config-if)# exit
Console(config)# exit