24 Tower-to-Rack and Rack-to-Tower Conversion Guide
www.dell.com | support.dell.com
Figure 1-13. Installing the Tower Trim Panel and Metal Feet
Removing the Bezel and Cover
1
To remove the bezel, perform the following steps:
a
Orient the system as shown in Figure 1-14.
b
Unlock the keylock. See Figure 1-14.
c
Rotate the keylock end of the bezel away from the front panel.
d
Unhook the other end of the bezel and pull the bezel away from the system.
trim panel
hex-head Phillips
screws (2)
hex-head Phillips
screws (2)
Y1001bk0.book Page 24 Thursday, July 8, 2004 4:32 PM
To Next Page
Loading...
