Tower-to-Rack and Rack-to-Tower Conversion Guide 25
Figure 1-14. Installing and Removing the Rack Bezel
2
Remove the system cover and set it aside (see Figure 1-15):
a
Loosen the two thumbscrews on the front of the system.
b
Slide the system cover back and grasp the cover at both ends.
c
Carefully lift the cover away from the system and set it aside.
bezel
keylock
release latch
Y1001bk0.book Page 25 Thursday, July 8, 2004 4:32 PM
To Next Page
Loading...
