Dell PowerEdge E05S - 6 Jumpers and Connectors; System Board Jumper

Jumpers and Connectors 175
Jumpers and Connectors
System Board Jumper
For information on disabling a password, see "Disabling a Forgotten Password"
on page 183.
Table 6-1. System Board Jumper Settings
Jumper Setting Description
PWRD_EN
(default) The password feature is enabled (pins 2-4)
The password feature is disabled, and iDRAC6
local access is unlocked at the next AC power
cycle
(pins 4-6)
NVRAM_CLR (default) The configuration settings are retained at system
boot (pins 3-5)
The configuration settings are cleared at the next
system boot (pins 1-3)
book.book Page 175 Wednesday, February 17, 2010 6:17 PM