OSPFv3 Commands 1191
Command Mode
User EXEC, Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays the number of each type of LSA in the
database and the total number of LSAs in the database.
console#show ipv6 ospf database database-summary
OSPF Router with ID (0.0.0.2)
Router database summary
Router......................................... 0
Network........................................ 0
Inter-area Prefix.............................. 0
Inter-area Router.............................. 0
Type-7 Ext..................................... 0
Link........................................... 0
Intra-area Prefix.............................. 0
Link Unknown................................... 0
Area Unknown................................... 0
AS Unknown..................................... 0
Type-5 Ext..................................... 0
Self-Originated Type-5 Ext..................... 0
Total.......................................... 0
show ipv6 ospf interface
Use the show ipv6 ospf interface command in Privileged EXEC mode to
display the information for the IFO object or virtual interface tables.
2CSPC4.XModular-SWUM200.book Page 1191 Thursday, March 10, 2011 11:18 AM
To Next Page
Loading...
Need help?
General