LLDP Commands 541
•
sys-name
— Transmits the system name TLV
•
sys-desc
— Transmits the system description TLV
•
sys-cap
— Transmits the system capabilities TLV
•
port desc
— Transmits the port description TLV
Default Configuration
By default, no optional TLVs are included.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
This command has no user guidelines.
Example
The following example shows how to include the system description TLV in
local data transmit.
console(config-if-1/0/3)#lldp transmit-tlv sys-desc
show lldp
Use the show lldp command in Privileged EXEC mode to display the current
LLDP configuration summary.
Syntax
show lldp
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
2CSPC4.XModular-SWUM200.book Page 541 Thursday, March 10, 2011 11:18 AM
To Next Page
Loading...
Need help?
General