1536 System Management Commands
Command Mode
Global Configuration
User Guidelines
The login banner can consist of multiple lines. Enter a quote to end the
banner text and return to the configuration prompt. Up to 2000 characters
may be entered into a banner. Each line entered will consume an extra two
characters to account for the carriage return and line feed.
Example
console(config)# banner login "banner text"
banner motd
Use the banner motd command to set the message that is displayed on
logging into the switch. Use no banner motd command to remove the
message.
Syntax
banner motd
MESSAGE
no banner motd
•
MESSAGE
— Quoted text
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration
User Guidelines
The motd banner can consist of multiple lines. Enter a quote to end the
banner text and return to the configuration prompt. Up to 2000 characters
may be entered into a banner. Each line entered will consume an extra two
characters to account for the carriage return and line feed.
2CSPC4.XModular-SWUM200.book Page 1536 Thursday, March 10, 2011 11:18 AM
To Next Page
Loading...
Need help?
General