3. screw (10) 4. system board handle
Next steps
1. Install the following:
a. Internal USB key
b. SD vFlash card
c. IDSDM or rSPI card
d. NDC
e. PCIe mezzanine cards
f. PCIe extender or storage controller card
g. Hard drive or SSD cage
h. Hard drive or SSD backplane
i. Hard drive(s) or SSD(s)
NOTE: Ensure that you reinstall the hard drives or SSDs in their original locations.
j. Cooling shroud
k. Memory modules
l. Processor(s) and heat sink(s)
2. Remove the plastic I/O connector covers from the back of the system.
3. Follow the procedure listed in the After working inside your system section.
4. Import your new or existing iDRAC Enterprise license. For more information, see the iDRAC8 User's Guide at Dell.com/
idracmanuals.
5. Ensure that you:
a. Use the Easy Restore feature to restore the Service Tag. For more information, see the Restoring the Service Tag by using Easy
Restore section.
b. If the Service Tag is not backed up in the backup flash device, enter the system Service Tag manually. For more information, see
the Restoring the Service Tag by using Easy Restore section.
c. Update the BIOS and iDRAC versions.
d. Reenable the Trusted Platform Module (TPM). For more information, see the Reenabling the TPM for BitLocker users section or
the Reenabling the TPM for Intel TXT users section.
Related concepts
Trusted Platform Module on page 117
Related References
Safety instructions on page 51
Related tasks
Removing the system board on page 113
Installing the Trusted Platform Module on page 118
After working inside your system on page 52
Restoring the Service Tag by using the Easy Restore feature on page 117
Entering the system Service Tag by using System Setup on page 117
Initializing the TPM for BitLocker users on page 118
Initializing the TPM for TXT users on page 119
Replacing the internal USB key on page 75
Installing the optional IDSDM card on page 77
Installing the optional rSPI card on page 80
Installing the Network Daughter Card on page 85
Installing the PCIe mezzanine card on page 72
Installing the PCIe extender or storage controller card on page 111
Installing the hard drive or SSD cage on page 104
Installing the hard drive or SSD backplane on page 107
116
Installing and removing server module components