Dell PowerEdge M630p - Chapter 1: Dell Poweredge M630 P Overview; Supported Configurations for the Poweredge M630 P System

Dell PowerEdge M630p overview
The Dell PowerEdge M630p is a half-height server module supported on the PowerEdge M1000e and PowerEdge VRTX enclosure and
support up to:
• One or two Intel Xeon E5-2600 v3 or E5-2600 v4 processors
• 24 DIMMs
• Single processor: Up to two 2.5-inch hard drives
• Single processor: Up to four 1.8-inch SSDs
• Dual processor: Up to two 2.5-inch hard drives
• Dual processor: Up to four 1.8-inch SSDs
Topics:
• Supported configurations for the PowerEdge M630p system
• Front panel
• Diagnostic indicators
• Locating service tag of your system
Supported configurations for the PowerEdge
M630p system
The Dell PowerEdge M630p system supports the following configurations:
1
Dell PowerEdge M630p overview 7