Dell PowerEdge R415 - Setup Menu

Dell
14
PowerEdge R415 Technical Guide
3 Mechanical
3.1 Chassis Description
The PowerEdge R415 chassis was designed to deliver a value-based, high-performance server that also offers
a level of redundancy. The PowerEdge R415 is available in two chassis configurations:
 Cabled hard drive chassis with LED module
 Hot-plug hard drive chassis with LCD module
Common features for the two available chassis include the following:
 Four 2.5‖ or 3.5‖ SATA or SAS hard drives (cabled or hot-plug)
 2.5‖ SSD hard drives
 Power supply (non-redundant or redundant)
 Dual gigabit LOMs without TOE acceleration
 Four DIMM slots supporting each processor
 Trusted Platform Module (TPM); in China, the S-TPM (Socket TPM) is used
 Riser card for optional PCIe expansion card
 Optional iDRAC6 Enterprise and iDRAC6 Express card (mounted on planar without PCI slot occupied)
 Support for 11G slim static and slim sliding rails
3.2 Dimensions and Weight
Xa
Xb
Y
Za
w/ bezel
Za
w/o bezel
Zb*
Zc
Max
Weight
482.4mm
434.0mm
43.0mm
35.0mm
20.1mm
606.0mm
641.9mm
15.9Kg
Figure 1. R415 Chassis Dimensions
*Zb measures to the nominal back wall external surface where the motherboard I/O connectors reside.