Dell PowerEdge R415 - Hard-Drive Indicator Patterns

Dell
16
PowerEdge R415 Technical Guide
Figure 6. Back View (Redundant Power Supply)
See the Back-Panel Features and Indicators section in the About Your System chapter of the PowerEdge R415
Hardware Owner’s Manual on Support.Dell.com for more information.
3.5 Power Supply Indicators
The PowerEdge R415 power supplies (redundant and non-redundant) have one status bi-color LED: green for
AC power present and amber for a fault.
Table 3. Power Supply Status
LED
Power Supply Status
AC Power is not present
AC Power is present
Fault of any kind is detected
DC Power is applied to the system
↔
Redundant power supply mismatch
(when hot-plugged/swapped)
See the Power Indicator Codes section in the About Your System chapter of the PowerEdge R415 Hardware
Owner’s Manual on Support.Dell.com for more information.
3.6 NIC Indicators
See the NIC Indicator Codes section in the About Your System chapter of the PowerEdge R415 Hardware
Owner’s Manual on Support.Dell.com for more information.
3.7 Side Views
Side views of the PowerEdge R415 are shown in Figure 7 and Figure 8.
Figure 7. Left Side View
Figure 8. Right Side View