Next steps
1. Install the ssd.
2. Install the battery.
3. Install the base cover.
4. Install the microSD card.
5. Follow the procedure in after working inside your computer.
Palmrest bracket
Removing the palmrest bracket
Prerequisites
1. Follow the procedure in before working inside your computer
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the ssd.
6. Remove the ssd bracket.
Steps
1. Un-route the wireless antenna [1] and then disconnect and un-route the speaker cable from the system board [2].
38
Disassembly and reassembly
To Next Page
Loading...
