Next steps
1. Install the ssd bracket.
2. Install the ssd.
3. Install the battery.
4. Install the base cover.
5. Install the microSD card.
6. Follow the procedure in after working inside your computer.
Speaker
Removing the speakers
Prerequisites
1. Follow the procedure in before working inside your computer
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the ssd.
6. Remove the ssd bracket.
7. Remove the palmrest bracket.
Steps
1. Remove the one (M2x2.5) screw that secures the LED board to the computer [1].
2. Lift and flip the LED board over to access the speaker cables [2].
42
Disassembly and reassembly
To Next Page
Loading...
