Dell Precision 3590 - Installing the display back cover

Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the SIM card.
3. Remove the base cover.
4. Remove the 4G WWAN card or 5G WWAN card, as applicable.
5. Remove the wireless card.
6. Remove the display assembly.
7. Remove the display bezel.
8. Remove the display panel.
About this task
The following images indicate the location of the display back cover and provide a visual representation of the removal
procedure.
Figure 88. Removing the display back cover
Steps
Remove all the components mentioned in the pre-requisites to get the display back cover.
Installing the display back cover
CAUTION: The information in this installation section is intended for authorized service technicians only.
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following images indicate the location of the display back cover and provide a visual representation of the installation
procedure.
Removing and installing Field Replaceable Units (FRUs)
123