About this task
The following images indicate the location of the M.2 2230 SSD in slot 1 (SSD1) and provide a visual representation of the
removal procedure.
Figure 27. Removing the M.2 2230 SSD from slot 1
Steps
1. Remove the screw (M2x3) that secures the M.2 2230 SSD to the SSD bracket and palm-rest assembly.
2. Slide and lift the M.2 2230 SSD off the SSD slot.
3. Remove the M.2 2230 SSD mounting bracket from the palm-rest assembly.
Installing the M.2 2230 SSD in slot 1 (SSD1)
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following images indicate the location of the M.2 2230 SSD in Slot 1 (SSD1) and provide a visual representation of the
installation procedure.
64
Removing and installing Customer Replaceable Units (CRUs)
To Next Page
Loading...
