Figure 19. Removing the wireless card
Steps
1. Remove the screw (M2x3) that secures the wireless-card bracket to the wireless card and palm-rest and keyboard
assembly.
2. Lift the wireless-card bracket off the wireless card.
3. Disconnect the antenna cables from the wireless card.
4. Slide and remove the wireless card off the wireless-card slot.
Installing the wireless card
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following images indicate the location of the wireless card and provide a visual representation of the installation procedure.
54
Removing and installing Customer Replaceable Units (CRUs)
To Next Page
Loading...
