Dell Precision 3590 - Display cable; Removing the display cable

Figure 89. Installing the display back cover
Steps
Place the display back cover on a flat surface.
Next steps
1. Install the display panel.
2. Install the display bezel.
3. Install the display assembly.
4. Install the wireless card.
5. Install the 4G WWAN card or 5G WWAN card, as applicable.
6. Install the base cover.
7. Install the SIM card.
8. Follow the procedure in After working inside your computer.
Display cable
Removing the display cable
CAUTION: The information in this removal section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the SIM card.
3. Remove the base cover.
4. Remove the 4G WWAN card or 5G WWAN card, as applicable.
5. Remove the wireless card.
6. Remove the display assembly.
7. Remove the display bezel.
124
Removing and installing Field Replaceable Units (FRUs)