Figure 31. Removing the M.2 2230 SSD from slot 2
Steps
1. Remove the two screws (M2x3) that secure the SSD thermal shield to the palm-rest assembly.
2. Lift the SSD thermal shield off the palm-rest assembly.
3. Slide and lift the M.2 2230 SSD off the SSD slot.
Installing the M.2 2230 SSD in slot 2 (SSD2)
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following images indicate the location of the M.2 2230 SSD (SSD2) in slot 2 and provide a visual representation of the
installation procedure.
68
Removing and installing Customer Replaceable Units (CRUs)
To Next Page
Loading...
