Next steps
1. Install the base cover.
2. Install the SIM card.
3. Follow the procedure in After working inside your computer.
Wireless Wide Area Network (WWAN) card
Removing the 4G WWAN card
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the SIM card.
3. Remove the base cover.
About this task
NOTE: The 4G WWAN card is available only on certain configurations. It is connected to the system with two antenna
cables.
The following images indicate the location of the 4G WWAN card and provide a visual representation of the removal procedure.
56
Removing and installing Customer Replaceable Units (CRUs)
To Next Page
Loading...
