Dell Precision M4800 - Installing the Expresscard Module

e) keyboard
f) optical drive
g) hard drive
h) palm rest
3. Disconnect the :
a) ExpressCard cable from the system board
b) USH board cable from the USH board
4. Remove the screws that secure the ExpressCard module to the computer and remove the ExpressCard module.
Installing the ExpressCard Module
1. Insert the ExpressCard module into its compartment.
2. Tighten the screws to secure the ExpressCard module to the computer.
3. Connect the:
a) ExpressCard cable to the system board
b) USH board cable to the USH board
4. Install the:
a) palm rest
b) hard drive
33