Dell Precision Mobile Workstation M6700 - Installing the Primary Hard Drive; Removing the Secondary Hard Drive

Installing the Primary Hard Drive
1. Engage the primary hard -drive bracket to the primary hard drive.
2. Insert the primary hard drive into its slot in the computer till it clicks in place.
3. Tighten the screws to secure the primary hard drive to the computer.
4. Install the:
a) base cover
b) battery
5. Follow the procedures in After Working Inside Your Computer.
Removing the Secondary Hard Drive
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove the:
a) battery
b) base cover
3. Remove the screw that secure that secondary hard drive in place.
4. Pull the tab upward and remove the secondary hard drive from the computer.
5. Remove the screw that secure secondary hard drive to the bracket.
19