Dell S3840cdn - Connecting the Mobile Device

Printing | 147
7 The printer must be rebooted after you set Wi-Fi Direct.
8 If Group owner mode is selected, tap Device, and then select About to check what
the SSID Prefix and Passcode are.
Connecting the Mobile Device
1 Connect the mobile device to the Wi-Fi Direct network.
The following procedure uses Windows
®
7, Windows
®
10, OS X 10.11, iOS, and
Android as examples.
For Windows
®
7:
a Click the network icon on the taskbar.
b Click the printer's SSID, and then click Connect.
c Enter the passphrase, and then click OK.
d Click Cancel, and then exit the Set Network Location window.
For Windows
®
10:
a Click the Start button, and then click Settings.
b Click the Wi-Fi icon.
c Click the printer's SSID, and then click Connect.
d Enter the passphrase, and then click OK.
For OS X 10.11:
a Click the network icon on the Menu Bar.
b Click the printer's SSID.
c Enter the passphrase, and then click Join.
For iOS:
a Tap Settings J Wi-Fi.
b Tap the printer's SSID.
c Enter the passphrase, and then tap Join.
For Android:
The procedure varies depending on your mobile device you are using. Refer to the
manual provided with your mobile device.
2 Install the printer on the mobile device.
Before printing, you are required to install the print driver accordingly.
For Windows
®
7, Windows
®
10: