Dell S3840cdn - Page 58

58 |Device
Login
Sounds when you log in to the printer.
Error \ Fault
Sounds when a job fails or an error occurs.
Power
Sounds when the machine is ready for operation, or is powered on.
Mobile Device Connected
Sounds when the printer detects a mobile device.
Power Saver
The Power Saver mode has two modes: Low Power and Sleep. When a specified period
of time has elapsed, the machine switches to these modes in the following order to
reduce power consumption.
Last operation on the machine J Low Power mode J Sleep mode.
NOTE:
• For Low Power Timeout and Sleep Timeout, you can enter values of up to 60 minutes in total.
Low Power Timeout
Specify a time period to enter the Low Power mode after the last operation.
Sleep Timeout
Specify a time period to enter the Sleep mode after entering the Low Power mode.
Auto Power Off
Select this to automatically turn the printer off after a specified time has elapsed from the
Sleep mode. Use the slider bar to specify a value for turning the printer off.
• Always Allowed
Turns the printer off when the specified time has elapsed.
• Allowed ONLY When Conditions are Met
Turns the printer off only when the following conditions are all met during the time
you specified.
– The USB device port is not used.
– The wired network port is not used.
– The wireless connection is not used.