Dell Printer Configuration Web Tool | 83
Host Name:
Enter the host name with up to 32 single-byte characters.
Primary Network
Allows you to select Ethernet or Wi-Fi. This is displayed when you are using multiple
interface.
IP Mode:
Allows you to select the TCP/IP operation mode.
IPv4
Select this option for IPv4.
IPv6
Select this option for IPv6.
Dual Stack
Select this option for an environment using both IPv4 and IPv6.
IPv6 Priority over IPv4 at Domain Name Resolution:
Select this to prioritize IPv6 for the domain name resolution feature.
IPv4
Click Edit for the settings.
Mode:
Allows you to select a method for obtaining the IP address, subnet mask, and gateway
address.
DHCP
The address, subnet mask, and gateway address will automatically be set via DHCP.
STATIC
Allows you to manually specify an IP address, a subnet mask, and a gateway address.
BOOTP
The address, subnet mask, and gateway address will automatically be set via BOOTP.
IP Address
Enter the IP address when selecting STATIC at Mode.
• Enter the address in the format "xxx.xxx.xxx.xxx", where "xxx" is a numeric value from of 0 to 255.
• Specify an IP address using numbers (0 to 9) and periods (.).
To Next Page
Loading...
