Dell S3840cdn - Protocols

Dell Printer Configuration Web Tool | 91
Protocols
Bonjour
Port
Select this to use Bonjour.
NOTE:
• To print from a printer detected by Bonjour, the LPD port must be activated in advance.
Wide-Area Bonjour
Select this to enable the Wide-Area Bonjour protocol.
NOTE:
• In multi-interface environment, this setting is for primary interface only.
Host Name
Sets the host name.
Printer Name
Sets the printer name.
HTTP
Port Number
Enter a port number.
NOTE:
• Do not use a number that is the same as a port number of another port. However, you can use the
same port number for a port that uses HTTP (IPP, Internet Services (HTTP), UPnP Discovery, SOAP,
WebDAV, and Web Services on Devices (WSD)).
CSRF Protection
Select this to enable Cross-Site Request Forgery (CSRF) protection for security. This
feature protects the settings on Dell Printer Configuration Web Tool from being altered
if a user unknowingly accesses a malicious website.
HTTPS (SSL)
Select this to enable HTTPS (SSL).
HTTPS Port Number
Enter a port number from 1 to 65535.
Maximum Connections
Enter the maximum number of simultaneous connections.
Connection Timeout
Sets the connection time-out period.