96 | Dell Printer Configuration Web Tool
Custom Filters
LPD
Port
Select this to use LPD.
Port Number
Enter a port number.
PJL
Select this to enable PJL. PJL allows you to specify the printer language to use for your
next job regardless of the printer language currently being used.
Print Mode
Select a print mode. The available options are Auto, PostScript 3, HP-GL/2, PCL 6/5e,
and TIFF/JPEG. Selecting Auto enables the machine to automatically determine and use
the most suitable language to print data received from the host device.
TBCP Filter
Select this to enable TBCP filter for PostScript data. When the transmission data includes
binary data or EPS data, disable this.
Timeout
Sets the connection time-out period.
Maximum Number of Sessions
Enter the maximum number of client sessions using LPD. You can enter a number from 1
to 10 in 1 session increments.
Parameter Text String Encoding
Select an encoding format for parameter text strings.
• Follow Device Settings
Use Added Text String Select whether or not to automatically add text strings in
Added Text String when you enter the authentication
information from the control panel.
Added Text String Enter the fixed string when Use Added Text String is
enabled. Up to 64 characters can be entered.
For example, when "host" is set in Common Name and
the user's mail address is "host@mail.com", this user
needs to enter "host@mail.com".
However, when Use Added Text String is enabled and
"@mail.com" is set in Added Text String, this user needs
to enter only "host" on the control panel. The machine
append "@mail.com".
User ID Query Filter Specify the text string to be used when searching user ID
upon network authentication. Up to 128 characters can
be entered.
To Next Page
Loading...
