Dell S3840cdn - SMB; SMTP

98 | Dell Printer Configuration Web Tool
SMB
Port
Select this to enable the port.
WINS Server Address Acquisition by DHCP
Select this to get a server address through DHCP. This is effective when the Mode setting
for IPv4 is set to DHCP.
Primary WINS Server Address, Secondary WINS Server Address
When disabling WINS Server Address Acquisition by DHCP, enter a server address.
SMTP
Configure the SMTP server settings.
Email Submission
Set whether or not to enable the e-mail submission port.
Email Notification
Set whether or not to enable the e-mail notification port.
Device Email
Enter the E-mail address of the machine with up to 128 characters.
SMTP Server
• Server Address
Opens the screen to set the SMTP server address.
Enter the address manually or click Select Server from List to search the SMTP server
to set the server address.
• Outgoing SMTP Port Number
Enter a port number in the range from 1 to 65535.
The default value is 25.
NOTE:
• Do not use the numbers assigned to the other ports.
Connection Security
Set the SSL / TLS communication for SMTP.
Outgoing SMTP Authentication
• SMTP Authentication
Select the authentication method for sending E-mail.
NOTE:
• If POP Before SMTP is selected, the POP3 settings must be set.
• AUTH GSSAPI (only for Kerberos), AUTH NTLMv2, AUTH NTLMv1, AUTH PLAIN, AUTH-LOGIN,
or AUTH CRAM-MD5 can be used as an authentication method.