Need help?Do you have a question about the Dell S5448F-ON and is the answer not in the manual?
Lists related Dell EMC PowerSwitch S5448F-ON documentation, including user guides and release notes.
Explains the meaning of various symbols used in the guide for notes, cautions, and warnings.
Provides instructions on how to submit feedback for the documentation.
Overview of the S5448F-ON as a TOR switch for data centers and its port configurations.
Details the key features and capabilities of the S5448F-ON switch.
Describes the switch's physical size, dimensions, and the function of its LED indicators.
Outlines different switch configurations and explains the purpose of the luggage tag.
Guidelines for selecting an appropriate installation site and placing the switch in a cabinet.
Instructions for safely mounting the switch in a rack and ensuring proper grounding.
Details on fan airflow options, environmental requirements, and power connection guidelines.
Provides instructions for safely storing the switch and its components.
Step-by-step instructions for attaching the ground cable to the switch.
Procedures for installing rack mounting hardware and the switch itself.
Detailed steps for installing both L-bracket and ReadyRail systems for rack mounting.
Instructions on how to install and remove optical transceivers from the switch.
Guidance on initial switch startup, post-placement checks, and replacement procedures.
Details available power supply options and the procedure for installing them.
Explains how to replace power supplies and make DC power connections.
Identifies the fan modules and explains the status indicators (LEDs) for fans.
Provides instructions for installing and replacing individual fan modules.
Steps for accessing the switch management interface via the RJ45 console port.
Steps for accessing the switch management interface via the Micro-USB-B console port.
Details secure boot keys, required files, and general installation procedures.
Instructions to enable the Secure Boot feature within the BIOS setup menu.
Instructions to disable the Secure Boot feature within the BIOS setup menu.
Explains the Grub bootloader and provides examples for ONIE installation.
Methods to verify switch operation and how ONIE discovers installers.
Details chassis dimensions, environmental operating parameters, and power requirements.
Lists IEEE standards, agency compliance, FCC, EU EMC, and safety certifications.
Information and guidelines for recycling and disposing of the switch.
To Next Page
General