Specifications
This section lists the S5448F-ON switch specifications.
CAUTION: Operate the product at an ambient temperature not higher than 45°C (113°F).
NOTE: For RoHS information, see Restricted Material Compliance.
Topics:
• Chassis physical design
• IEEE standards
• Agency compliance
• USA Federal Communications Commission statement
• European Union EMC directive conformance statement
• India
•
Japan VCCI compliance for class A equipment
• Safety standards and compliance agency certifications
• Electromagnetic compatibility
• Product recycling and disposal
Chassis physical design
Table 6. Chassis physical design
Parameter Specifications
Height 43 mm (1.693 in)
Width 438.5 mm (17.26 in)
Depth 550 mm (21.65 in)
● PSU handle 29.3 mm (1.15 in)
● PSU latch 34.6 mm (1.37 in)
● Fan tray handle 25.0 mm (0.99 in)
Chassis weight with factory-installed components
● 11.67 kg (2 PSUs and 6 fans)
● 25.73 lbs (2 PSUs and 6 fans)
Rack clearance required
● Front: 12.7 cm (5 inches)
● Back: 12.7 cm (5 inches)
Table 7. Environmental parameters
Parameter Specifications
Operating temperature
● 0°C to 45°C (32°F to 113°F) continuously
● -5°C to 45°C (23°F to 113°F) short term
● Short term is </= 1% of operational hours per year.
NOTE: Reduce maximum temperature by 1°C/125 meters
(1°F/228 feet) above 950 meters (3,117 feet).
Operating humidity 5% to 90% (RH), noncondensing
Storage temperature -40°C to 70°C (-40°F to 158°F )
10
50 Specifications
To Next Page